pp2000|lexia3|新标致|雪铁龙二合一汽车诊断仪|检测仪

产品价格：: 面议
所属行业：: 检测设备
关键词：: pp2000 lexia3 新标致雪铁龙二合一汽车诊断仪检测仪供应检测维修设备检测设备
更新时间：: 2017-01-06 11:36

询盘时请说明在【汽车配件网】看到的该产品信息！
负责声明：所展示的信息由供货商提供，内容的真实性、准确性和合法性由发布会员负责。【汽车配件网】不承担任何责任。
友情提醒：为了您的交易安全，请尽量使用货到付款方式！如需要投诉，可进入"消费者防骗指南"了解投诉及处理流程，我们将竭诚为您服务！

品牌： ecuobd
起订：20
供货总量：123
发货期限：自买家付款之日起 2 天内发货
所在地：广东
有效期至：长期有效

尺寸500（mm） (mm)
电源电压12（V） (V)
类型汽车电脑检测仪
品牌ecuobd
型号pp2000 lexia3
检测系统发动机

联系方式QQ：56628478 TEL:13410057177 汽车诊断设备淘宝店铺：http://ecuobd.taobao.com 最新软件：DIGBOX，提供软件安装视频！ 标致检测仪 PP2000适用于东风标致和法国标致所有车型，具有最新的专家系统，中文显示，是服务站必备标致专用故障诊断仪。覆盖车型：107、1007、106、106R、205、206、306、306R、307、405、406、406R、406Coupe、407、605、607、806、807、PARTNER、EXPERT、BOXER等，检测功能：可检测东风标致和法国标致汽车所有电控系统，如发动机、自动变速箱、防盗系统、安全气囊、自动空调系统、ABS、天窗、影音系统等，并进行匹配、编程和远程诊断。配置清单：1.通讯模块 2.OBDII接线 3.USB接线 4.PP2000软件 雪铁龙检测仪 Proxia3 适用于东风雪铁龙和法国雪铁龙所有车型，是东风雪铁龙4S店必配的专用诊断仪器。覆盖车型：富康、爱丽舍、毕加索、赛纳、凯旋、AX、ZX、BERLINGO、C1、C2、C3、C4、C5、C6、C8等。检测功能：可检测东风雪铁龙和法国雪铁龙汽车所有电控系统，如发动机、自动变速箱、防盗系统、安全气囊、自动空调系统、ABS、天窗、影音系统等，并进行匹配、编程和远程诊断。。配置清单：1、通讯模块 2、OBDII接线 3、USB接线 4、Proxia3软件 5、30PIN红线Dealer level diagnostic device for comprehensive Citroen and Peugeot cars diagnostic. You can do all as a authorized dealer does.This diagnostics software allows you to perform complete diagnostics of all from 1995 untill present models. Diagnose is performed via OBD-II connector (which is located near steering wheel) or via manufacturer-specific connector (only older cars, pre-2001).

Supported functions
Unlike other universal car scanner tools which only read fault codes, this software performs nearly ALL the functions like the original dealer diagnostic tool. Our diagnostic interface contains K-Line multiplexor, CAN-BUS interfaces and SAE J1850 bus (both PWM and VPW).

FUNCTIONS SUPPORT

Read identification
Displays complete identification of control unit, e.g. part number, software/hardware version, manufacturer, etc...

Read fault codes
Displays all stored and pending fault codes with complete description (e.g. "Rail pressure - too low pressure").
Program supports report printing or copy to clipboard.

Clear fault codes
This function clears all stored fault codes and other diagnostic information.

Auto-scan (complete car scan/test)
Detects all ECUs (electronic control units) installed in car and reads all diagnostic fault codes.

Measured Values
Program displays live Data like Engine Speed, Battery voltage, Oxygen Sensor, Coolant Temperature, etc. Values can be displayed in graph, 9 values at once, or full listing (all measured values). Logging to file is also supported, which allows offline analysis.

Actuator test
Actuator test activates particular actuator (e.g. turn on fuel pump, lock/unlock wheel, lock/unlock doors, cut off fuel, etc..)

Programming functions/Adaptation
This feature is of great importance in all vehicles because systems like Engine control units, Immobilizers, Airbags, Alarms, Body Control Units, and some others, require you to perform reset or programming procedures after car repair is done, or even configuration after replacing broken Control Unit.

Hardware and software requirements
Software requires at least Intel Celeron/Pentium III 400 MHz, 128 MB RAM, 50MB free HDD space and USB 1.1 port (USB 2.0 recommended) and Microsoft Windows 98 SR2/2000/XP with the latest service pack installed.

NOTEBOOK READY TO WORK(optional)

Package includes:
* Main interface
* Power supply (110-220V)
* OBD-2 cable
* ISO cable for cars before 2001
* USB cable
* Software CD

共0条 [查看全部] 相关评论